Skip to product information
1 of 1

ResMed CPAP Airsense 10 Elite TRI

ResMed CPAP Airsense 10 Elite TRI

Regular price Rs. 30,990.00
Regular price Rs. 39,700.00 Sale price Rs. 30,990.00
Sale Sold out



  • Connectivity comes standard
  • Advanced event detection
  • AutoRamp™ with sleep onset detection delivers low pressure to help patients fall asleep with ease. Once the patient is asleep, it comfortably ramps up the pressure to the prescribed level.
  • The quiet Easy-Breathe motor makes for a peaceful environment for the patient and their bed partner.
  • Expiratory pressure relief (EPR™) maintains the optimal treatment for the patient during inhalation and reduces pressure during exhalation.
  • SmartStart™ allows the patient to start therapy by breathing in, instead of pressing the 'Start' button.
  • Pulse oximetry monitoring is available.
  • Integrated humidification simplifies setting up the device and makes therapy easier for your patients.
  • Using AirView™, you can access nightly therapy data, troubleshoot remotely (using the remote assist feature) and change device settings remotely.
  • The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings.
  • The built-in ambient light sensor adjusts the brightness of the screen based on the light in the room and turns off automatically.


  • Height - 116 mm
  • Weight - 1248 gm
  • Breadth - 255 mm
  • Length - 150 mm
  • Pressure Measure Tolerance  - ±[0.5 cm H20 (0.5 hPa) + 4% of measured value]
  • Flow Measure Tolerance - ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
  • Peak Power Consumption - 104W (108VA)
  • Operating Pressure Range - 4 to 20 cm H2O
  • Supplement Oxygen Maximum Flow -4 L/min
  • Power Supply Unit - 90W power supply unit
  • Storage and Transport Humidity -5 to 95% relative humidity, non-condensing
  • Storage and Transport Temperature - -4°F to +140°F (-20°C to +60°C) 
  • Operating Humidify - 10 to 95% relative humidity, non-condensing
  • Housing Construction - Flame retardant engineering thermoplastic
  • Water Capacity - To maximum fill line 380 mL
  • Air Outlet - 22 mm (complies with ISO 5356-1:2004) 
  • Typical Power Consumption - 53W (57VA)
  • Sensors - Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
  • Operating Altitude - Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
  • Operating Temperature - +41°F to +95°F (+5°C to +35°C)
  • Maximum Single Fault Steady State Pressure - The device will shut down in the presence of a single fault if the steady-state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
  • Modes - CPAP


  • CPAP Machine
  • Built-In HumidAire Heated Humidifier
  • Standard Humidifier Chamber
  • SlimLine Tubing - 15mm Diameter
  • Power Supply and Cord
  • Travel Bag
  • 1- Standard Filter (Installed)
  • Filter Cover
  • SD Card - Inserted in Machine
  • Patient Manual

Warranty: 1 Year

Additional Information 

ResMed Airsense 10 Elite TRI has a built-in ambient light sensor that adjusts the screen brightness based on the light in the room. So if patients have to get up during the night, the backlight on the screen does not disturb their bed partner.
The Easy-Breathe motor is quiet, giving patients and their bed partners a more peaceful night's sleep.
Expiratory decompression is  Designed to make therapy more comfortable, the Expiratory pressure relief (EPR) maintains optimal treatment for the patient during inhalation and reduces the pressure of the mask delivered during expiration.
Constant humidification throughout the night with the HumidAir integrated humidifier with advanced HumidAir technology helps patients adapt to treatment and use therapy longer.

 Warranty: 2 year


View full details